source: pcp/src/pcp.c@ d8bb59

/** \file pcp.c
 * Main routine, Run super-functions and signal handling.
 * 
 * This file contains just framework:
 * The main() routine, passing its arguments on to Run(), which does signal
 * initialization InitSignals() and setting verbosity levels and calls RunSim()
 * which is then just a wrapper for CalculateMD().
 * For the signals there is the actual handler SigHandlerCPULIM() for the external
 * exit signal, routines to check for the signal CheckCPULIM() and give correct
 * return code to old handler CheckSigReturn().
 * 
  Project: ParallelCarParrinello
 \author Jan Hamaekers
 \date 2000

  File: pcp.c
  $Id: pcp.c,v 1.36 2007/02/05 13:59:24 foo Exp $
*/

/*! \mainpage Introductory to Parallel Car Parrinello
 * 
 * This is a quick overview of the programme pcp, explaining as shallowly as possible
 * its possble uses. For a more profound introduction be referred to its (german) diploma
 * thesis paper here: http://wissrech.ins.uni-bonn.de/teaching/diplom/diplom_hamaeker.pdf
 * (Note: All numbering behind formulas always refer to this thesis paper)
 * 
 * ParallelCarParrinello - or short pcp - is the parallel implementation of
 * Car-Parrinello-Molecular-Dynamics, using a density field theory approach. In brief,
 * a given configuration is minimised in terms of the energy functional. The system
 * is encapsulated in a cell and thus periodic boundary conditions are applied.
 * The potential is also evaluated and this yields a force for every moving ion in
 * the cell. Thereby the molecular dynamics is performed.
 * 
 * The basic idea behind the parallelisation is most importantly the simultaneous
 * fast fourier transformation, where the three-dimensional grid of coefficients in
 * a plane wave approach are subdivided into planes for the hither transformation and
 * pens for the thither one. These one or two dimensional ffts can be done by multiple
 * processes and later reassembled.
 * Second is the parallelisation of the minimisation. Each process holds a certain
 * "local" part of all electronic wave functions and the others are assumed constant
 * while minimising over these local ones by a conjugate gradient mechanism.
 * Lastly, the Gram-Schmidt-Orthonormalisation is also done parallely.
 *
 * This Introductory is divided in the following sections:
 * - \subpage intro Introduction
 * - \subpage tutorial Hands-on Tutorial
 * 
 * © 2006 Frederik Heber
 */
 
/*! \page intro Introduction
 *  
 * 
 * \section install Installation
 * 
 * 
 *  \subsection reqs Requirements
 * 
 * This package relies on certain other packages.
 * - FFTW version 2\n
 *    This is a fast implementation of Fast Fourier Transformations.
 *    Currently, version 3 is not supported. Get it from their webpage, compile
 *    and install the libraries and header files in a path where the linker will
 *    find them.\n
 *    http://www.fftw.org/
 * - MPICH\n
 *    This is an implementation of the Message Parsing Interface, which enables
 *    simple build of parallel programs by means of exchange data via messages.
 *    Here as well we need the libraries and header files, compile and install
 *    them in an accessible directory, and also the launcher mpirun.\n
 *    http://www-unix.mcs.anl.gov/mpi/mpich/
 * - OpenDx\n
 *    For optional visualization of the calculations, displaying electronic densities,
 *    ion positions and forces within the cell.\n
 *    http://www.opendx.org/
 * 
 *  \subsection process Installation Process
 * 
 * Note beforehand that this package manages compilation on various architectures with
 * help of some GNU tools such as automake (Makefile.am) respectively autconf (configure.ac).
 * 
 * After unzipping the archive into an appropiate source directory, the programme has
 * to be compiled by executing consecutively:
 * - ./configure
 * - make
 * - make install
 * 
 * It is recommended to create two additional directories:\n
 * One "build" directory which may safely reside in the main source folder,
 * wherein the actual build process is launched and thus temporarily created object
 * files removed from the main folder's contents. This happens automatically if
 * configure is not called from the main folder but within this build folder by:
 * - "../configure"
 * 
 * Secondly, a "run" directory. This might either be an already present "/usr/local/bin"
 * which is taken as default, but also a "/home/foo/pcp/run". If desired this path
 * should be appended to the configure command as follows:
 * - "../configure --bindir /home/foo/pcp/run"
 * 
 * and the executable will be automatically installed therein on calling make install.
 *
 * Alternatively, you may more generally pick "--prefix=/home/foo/pcp", which would prefix
 * all installation directories (such as doc, man, info, lib, ...) with the given directory
 * home/foo/pcp. Thus, the executable would now be installed upon evocation of 'make install'
 * in /home/foo/pcp/bin (because ./bin is default for executables). This and more options
 * are explained when invoking './configure --help'. The subdirectory where the executable is
 * installed in will from now on be called "bindir".
 * 
 * Next, we must unpack the archive containing the pseudopotential files pseudopots.tar.gz by
 * entering 'tar -zxvf pseudopots.tar.gz' in the main dir of the package. Note that the 
 * pseudopotential files now reside in 'defaults/pseudopot/' respectively to the main dir.
 * 
 * At last, you may re-generate this very documentation of the pcp package with the help of the
 * 'doxygen' package (http://www.doxygen.org/) by execution of:
 * - make doxygen-doc (edit the paths in doxygen.cfg beforehand though!)
 * 
 * Even more, if you are interested in the documentation of the simple molecuilder sub programme,
 * enter /home/foo/pcp/build/util/molecuilder and execute the same command therein which generates 
 * the documentation in /home/foo/pcp/util/molecuilder/doc/html (and may be viewed by giving
 * /home/foo/pcp/util/molecuilder/doc/html/index.html to a standard web browser).
 * 
 * \section use Usage
 * 
 * Having unpacked, compiled and installed the programme, we are actually set to go
 * besides the specification of the actual physical problem. If you desire a ste-by-step
 * introduction to the handling of the simple hydrogen molecule, be referred to the section
 * \ref tutorial.
 * 
 *  \subsection specify Specifying the Problem
 * 
 *  There are two things necessary:
 *  - a configuration file with various informations from stop conditons to Z number
 *    or the basic cell vectors, giving its volume, number of ions, position and type
 *    and so on ... 
 *    The given configuration file in the subdirectory "defaults" is fully documented
 *    and its sense should be easy to grasp thereby - or see below in the section
 *    \ref config.
 *  - pseudopotential files which reside in a certain directory specified in the
 *    config file. Ine is necessary for each different atom (discerned by atomic
 *    number Z) specifying the pseudo potential on a grid, generated by the fhi98PP
 *    package: http://www.fhi-berlin.mpg.de/th/fhi98md/fhi98PP/index.html\n
 *    These are also already present in the directory called "defaults/pseudopot".
 * 
 *  \subsection exec Programme execution with mpirun ...
 * 
 *  Basicially the programme is started as follows:
 *  - mpirun -np 1 -vvv -machinefile /home/foo/.rhosts pcp ../defaults/main_pcp\n
 *  where "-np 1" states the number of processors to use, so here just one, "-vvv"
 *  relates to the verbosity of the intermediate output (more v's, more output),
 *  "-machinefile" points to the rsh text file with allowed hosts (present on all
 *  hosts) and last but by no means least the config file with relative path
 *  "../defaults/main_pcp".\n
 *  Take care that your machinefile contains enough hosts and also that "-np"
 *  matches the product of ProcPEPsi and ProcPEGamma specified in the config file.
 *  You won't see the error messages, when one of clients hangs (mpirun just idles
 *  on all others as they cannot reach the host whose pcp has stopped).
 *
 *  The important input and output is all done via files. Configuration and PseudoPot
 *  files are read on startup when the Problem structure, with its various parts, is
 *  initialized. Each given amount of made steps forces, energies, ion positions and
 *  the electronic density if desired are written to file, which can be read and
 *  visualized lateron by the Open Data Explorer.
 *  
 *  Let's now come to the parallel execution of the programme on multiple hosts.
 *  Generally, it is recommended to choose between n+1 and 2n processes for n hosts.
 *  There are two ways of connection to the other clients, either via rsh or ssh.
 *  Seemingly, mpich automatically picks the right one, first rsh, then ssh.
 * 
 *    Note: 
 *    -# Make sure that the executable with its needed input files are present on all
 *       other machines (Most common way is a shared directory, such as the user's home
 *       residing on a server shared via NFS to all clients)
 *    -# Make sure that the paths are correct and the same on all hosts (also the config paths)
 *    -# Use a homogeneous set of clients (no mixing of architectures or slow with fast
 *       systems!)
 *
 *    \subsubsection rsh ... with RSH
 * 
 *    Most important in this case is the file .rhosts in your home, where line by line
 *    the hostnames of available computers are included. Via RSH-Login the programme is
 *    launched on all machines by mpirun.\n
 * 
 *    \subsubsection ssh ... with SSH
 *    
 *    Via a passphrase and an ssh agent a much safer - due to encryption - way is used
 *    to connect to other clients, employed as follows
 *    - ssh-keygen -t rsa (enter keyphrase, public and private key is stored in ~/.ssh/)
 *    - cat ~/.ssh/\*.pub >>~/.ssh/authorized_keys (if home is shared via nfs) OR \n
 *      cat ~/.ssh/\*.pub | ssh user\@remote-system 'cat>>.ssh/authorized_keys' (when the
 *      user home is not shared via nfs for each remote-system)
 * 
 *    Afterwards, start an SSH agent and 'ssh-add' the above pass-phrase. It
 *    might be a good idea, to give a limited timespan 'ssh-add -t 86400' (seconds).
 * 
 *    Test it by trying something like 'ssh host /bin/ls /bin'. It should work (just print
 *    the /bin directory) without any queries or halts. Otherwise remove host and its IP
 *    from .ssh/known_hosts and try again. Check this for all hosts in your .rhosts,
 *    or try 'tstmachines -machinefile=/home/foo/.rhosts' which is supplied with mpich.
 * 
 *    The ssh method is especially preferrable if the hosts do not reside within a protected
 *    network, such as shielded by a firewall from the outside internet with internal IP
 *    adresses.
 * 
 *  \subsection results The Results
 * 
 *  Process 0 does all the output and is always started on your localhost.
 *  There a number of different output files if the programme is told to produce
 *  them in the configuration file. They all beginn with "pcp." and most end with
 *  the output step count in 4 digits such as ".0001". In between lies the actual
 *  content information:
 *  - "speed": Time measurements for the various sections of the calculations.
 *  - "density": There are three types: "doc" and "dx" specifiy the file format for
 *    OpenDx, while "data" contains the actual densities. These are only produced
 *    if DoOutVis is set to 1
 *  - "ions": "pos" means position, "force" contains forces from the dynamics
 *    simulation represented by arrows in OpenDx, "datZ", "doc" and "dx" are again
 *    only needed to specifiy the file format.
 *  - "energy.all": Total energy
 *  - "forces.all": Total force
 * 
 *  There are visualization scripts included in the subdirectory "defaults" such
 *  as "visual.cfg" for use with OpenDx.
 * 
 * 
 * \section start Getting started
 * 
 *    In Order to get a first understanding of the programme, here is a brief explanation of its most
 *    important functions:
 *    -# Init(): Super-function to most of the initialisation subroutines, that allocate memory or
 *      setup the wave functions randomly or calculate first energies and densities.
 *    -# CalculateMD(): Contains the super-loop that calculate the force acting on the ions, moves them,
 *      updates the electronic wave functions and prints results to file.
 *    -# CalculateForce(): On evaluating the force acting on the ions also the actual minimisation of
 *      the wave functions - one after the other - is done, energies and densities calculated on ever
 *      finer grids.
 *    -# CalculateNewWave(): Is the actual (Fletcher&Reeves) conjugate gradient implementation that
 *      minimises one wave function by calculating the gradient, preconditioning the resulting matrix,
 *      retrieving the conjugate direction and doing the line search for the one-dimensional minimum.
 * 
 *    Most of these functions call many others in sequence, so be prompted to their respective
 *    documentation for further explanation and formula.
 * 
 *  \subsection follow Following the course of the programme
 * 
 *    When the programme is launched with the option "-vvv" for greater verbosity a series of output
 *    is printed to the screen, which briefly shall be explained here.
 * 
 *    At first there is the initialization output stating number of nodes on the ever more finely
 *    grids in normal and reciprocal space, density checks, parameters read from the configuration
 *    file and so on, until the minimisation finally commences.
 * 
 *    The most prominent line then looks as follows:
 *    (0,0,0)S(0,0,0):        TE: -1.750005e+01       ATE: -1.825983e+01       Diff: 1.000000e+00      --- d: 6.634701e-01    dEdt0: -1.943969e+00    ddEddt0: 9.673485e-01 
 *
 *    The first three numbers refer to process numbers within MPI communicators: SpinUp/Double(0)SpinDown(1),
 *    number within coefficients sharing, within wave functions sharing group.
 *    The next three numbers after the "S" refer to: Number of performed minimisation steps, number of
 *    currently minimised local wave function, number of minimisation steps performed on this wave function.
 *    Afterwards follow: Total energy (TE), approximated total energy (ATE), relative error in the prediction (diff),
 *    delta (the one-dimensional line search parameter \f$cos \Theta\f$), the first (dEdt0) and second (ddEddt0)
 *    derivative of the total energy functional (at parameter = 0).
 * 
 *    Ever and again there appear checks such as:
 *    -# "ARelTE: 1.387160e-02    ARelKE: 3.074929e-03", stating the actual relative difference in total and
 *       kinetic energy between this and the last check
 *    -# "(0)TestGramSchm: Ok !", having tested the desired orthogonality of the wave functions
 *    -# "Beginning minimisation...", starting a perturbed minimisation run.
 * 
 *    At the end the programme will print a number of different energies to the screen: total, Hartree,
 *    ionic, kinetic, ... energies.
 * 
 *
 * \section tech Technical Details
 * 
 *  \subsection config The Configuration file explained
 *
 *  The first column always contains a keyword (for which the programme parses, so
 *  the ordering as given here needn't be replicated) following one or more values
 *  or strings.
 * 
 *  - mainname: The short name of the Programme
 *  - defaultpath: Full path indicating where to put the output files during runtime
 *  - pseudopotpath: Full path to the needed PseudoPot files
 *  - ProcPEPsi: Number of process (groups consisting of ProcPEPsi processes) among which
 *    wave functions are split up (e.g. MaxPsiDouble 16, ProcPEPsi 4, ProcPEGamma 2 results
 *    in 4 wave functions per group and each group has 2 processes sharing coefficients)
 *  - ProcPEGamma: Number of processes which make up one wave functions coefficients sharing group
 *  - DoOutVis: Output files for OpenDX (1 - yes, 0 - no)
 *  - DoOutMes: Output Measurement (1 - yes, 0 - no)
 *  - AddGramSch: Do an additional GramSchmidt-run after a Psi has been minimised (hack)
 *  - Seed: Initialization value for pseudo random number generator on generating wave function coefficients, 0 means
 *    constant 1/V for perturbed wave functions.
 *  - UseSeparation: Minimise unoccupied states in a separate run per level indepedent of occupied states
 *  - UseFermiOccupation: After each minimisation run, occupation of orbitals will be reset according to Fermi distribution
 *  - MaxOuterStep: Number of to be performed Molecular Dynamics steps
 *  - Deltat: time slice per MD step
 *  - OutVisStep: Output visual data at every ..th step
 *  - OutSrcStep: Output measurement data at every ..th step
 *  - TargetTemp: Target temperature in the cell (this medium ion velocity)
 *  - ScaleTempStep: MD temperature is scaled at every ..th step
 *  - MaxPsiStep: number of minimisation steps per state(!) before going on to next local state (0 - default (3))
 *  - MaxMinStep: standard level stop criteria - maximum number of minimisation steps over all states
 *  - RelEpsTotalE: standard level stop criteria - minimum relative change in total energy
 *  - RelEpsKineticE: standard level stop criteria - minimum relative change in kinetic energy
 *  - MaxMinStopStep: standard level stop condition is evaluated at every ..th step, should scale with orbital number
 *  - MaxMinGapStopStep: standard level stop condition for gap calculation is evaluated at every ..th step
 *  - MaxInitMinStep: initial level stop criteria - maximum number of minimisation steps over all states
 *  - InitRelEpsTotalE: initial level stop criteria - minimum relative change in total energy
 *  - InitRelEpsKineticE: initial level stop criteria - minimum relative change in kinetic energy
 *  - InitMaxMinStopStep: initial level stop condition is evaluated at every ..th step
 *  - InitMaxMinGapStopStep: initial level stop condition is evaluated at every ..th step
 *  - BoxLength: Length of the super cell in atomic units (lower triangle matrix: 1 value, 2 values, 3 values)
 *  - ECut: Energy cutoff specifying how man plane waves are used (in Hartrees)
 *  - MaxLevel: number of different mesh levels in the code, >=2
 *  - Level0Factor: Mesh points Factor for the topmost level
 *  - RiemannTensor: Use RiemannTensor
 *  - PsiType: Whether orbits are always doubly occupied or spin up and down is discerned (and completely separated in calculation, needs at least 2 processes!)
 *  - MaxPsiDouble: specifying how many doubly occupied orbits there are (either this or next depends on given PsiType)
 *  - PsiMaxNoUp/PsiMaxNoDown: specifying how many spin up or down occupied orbits there are
 *  - RCut: Radial cutoff in the Ewald summation
 *  - IsAngstroem: length in 0 - Bohr radii or in 1- Angstrï¿œm
 *  - MaxTypes: maximum number of different ion types (important for next constructs)
 *  - Ion_TypeNr: 6 values - Number of ions, atomic value, Gauss radius, maximum angular momentum of Pseudopotenials, L_loc and mass of ion (Nr in keyword must go from 1..MaxTypes!)
 *  - Ion_TypeNr_Nr: 4 values - position (x,y,z) in atomic units, IonMoveType (0 - movable, 1 - fixed).For each stated IonType there must such a keywor for each ion (second number goes from 1..Number of ions!)
 *  
 * \section notes Notes on implementation and code understanding
 * 
 *  \subsection densities Densities and Wave functions
 *
 *    The coefficients of densities and wave functions both in real and reciprocal space are only in parts stored locally
 *    on the process. Coefficients of one wave functions may be shared under a number of processes, increasing speed when
 *    doing loops over G - reciprocal vector, and the wave functions as a whole may also be shared, increasing Fourier transform
 *    and also minimization - however with the drawback of parallel conjugate gradient minimization which might lead to errors.
 *   
 *    Additionally, the coefficients are structured in levels. The grid is present in ever finer spacings, which is very helpful
 *    in the initial minimization after the wave functions have been randomly initialized. Also, the density is always calculated
 *    on a grid twice as fine as the one containing wave function coefficients, as the fourier transform is then exact. That's
 *    why there are always two levels: LatticeLevel LevS and Lev0. The first being the standard level with the wave functions,
 *    the latter for densities (one often stumbles over "Dens0" as a variable name). Also there two kinds of densities:
 *    DensityArray and DensityCArray, the first contains densities in real space, the latter in reciprocal space. However, both
 *    are densities, hence the scalar product of their respective wave functions.
 *    For this reason one finds often construct which use a position factor in order to transform wave coefficients into ones
 *    on a higher level, followed by a fourier transform and a transposition, see e.g. CalculateOneDensityR(). It is often
 *    encountered throughout the code.
 *  
 * 
 * © 2006 Frederik Heber
 */
 
 
/*! \page tutorial Hands-on Tutorial
 * 
 * 
 *  In this section we present a step-by-step tutorial, which leads you from the creation of a typical config file for a hydrogen
 *  molecule through the actual calcualtion to the analysis with final plots and graphics.
 * 
 *  \section configfile Creating the config file
 * 
 *    First, we need to create the config file. For this we use the utility 'molecuilder' which resides in the util subdirectory
 *    and is compiled upon execution of 'make' as described in Section \ref process and finally installed in the bindir. Go there,
 *    pick and create a directory, such as '/tmp/H2/' and start the utility:
 *    - ./molecuilder /tmp/H2/H2-config
 * 
 *    You might want to change the config file name, here chosen as 'H2-config', according to your personal liking, it is completely
 *    arbitrary. It is however recommended to pick an individual directory for each molecule upon which you choose to perform DFT
 *    calculations as there are a number of files which are produced during the run.
 * 
 *    Molecuilder will first ask for a cell size, which is entered by typing in the six elements of a symmetric matrix, for an cubic
 *    cell of 20 a.u. length, enter 20, 0, 20, 0, 0, 20.
 * 
 *    Next, you see two lists, both are empty, and a menu. So far no elements or atoms have been put into the cell. We want to add an
 *    atom, press 'a' and enter. Now we have to choose in which way we want to add the atom. The choice is either in absolute (x,y,z) 
 *    coordinates, or relative to either another absolute point or to an already placed atom. The last option is used in the case when
 *    there are two atoms and you want to add a third according to its angle and distance to the former two.
 * 
 *    For now, we add the first hyodrogen atom. We want to put the molecule which consists of two hydrogen atoms at a distance of 1.4
 *    atomic units symmetrically off the cell's centre. Thus we choose option b, enter 10, 10, 10 as the reference point and then give the
 *    relative coordinates as 0.7, 0, 0. Thus, the molecule will be aligned along the x axis. The Z number is 1, in the case of hydrogen.
 *    Upon the last enter you notice that both the element and the atom list have filled a bit. Let's add the second atom. Choose 'a'
 *    again and option c this time, picking the first already entered atom as the reference point, by entering 0 ('number in molecule') 
 *    next. Enter: -1.4, 0 , 0, and again Z = 1.
 *    Afterwards, we see that in the element list, the second entry changed from 1 to 2. It's the number of atoms of this element which
 *    the molecules consists of so far. Next is Z number, R-cut, lmax and lloc, the element's mass and a name and short hand which is
 *    taken from the database in the file 'elements.db' which must reside in the same directory as molecuilder.
 * 
 *    Finally, we need to specify some additional info in the config file that's non-standard. Enter 'e' in the menu to edit the
 *    current configuration. The list is huge, you might have to scroll a bit and don't panic, most of these are trivial and will
 *    become comprehensible with time. First is the paths, option 'B' and 'C'. Upon entering the option, it will give the the
 *    "old" value and request a new one. Enter:
 *    - B: /tmp/H2/
 *    - C: /home/foo/pcp/defaults/pseudopot
 *    
 *    The latter one is the path to the pseudopotential files which reside in the archive 'pseudopots.tar.gz' in /home/foo/pcp or
 *    whereever you have extracted the distributed pcp package to. Unzip it by 'tar -zxvf pseudopots.tar.gz' and it will create an
 *    additional directory called defaults wherein another directory called pseudopot resides containing the files for element with
 *    atomic number 1 up to 80 -- these are the files generated with the FHIMD PseudoPotential Generator.
 * 
 *    As the molecule and all necessary config file settings are entered, enter 's' to save the config file under the filename stated
 *    on the command-line and 'q' to quit.
 *  
 *    
 *    Now, we take a look at the created config file itself. Take your favorite editor and compare it to the explanations given in the
 *    secion \ref config. According to your machine setup, the following entries must be changed:
 *    - ProcPEPGamma/ProcPEPsi: Their product gives number of processes which must be started. As a beginning you might leave 1 here for
 *      both entries.
 *    - VectorPlane: Enter 1 (it's a cut plane for a two-dimensional representation of the current density)
 *    - VectorCut: Enter 10. (cut is done at this coordinate along the by VectorPlane given axis)
 *    - BoxLength: Check the six entries of the symmetric matrix for the correct cell size
 *    - ECut: In general, both the precision and time needed for the calculation. Reasonable values for H2 are 8. to 24.
 *    - MaxPsiDouble: Enter 1 here, it's the number of doubly occupied orbitals which is one in case of the hydrogen molecule 
 *    - AddPsis: Leave 0, this is the number of unoccupied orbitals which we do not need.
 *    - RCut: Enter 20., the cell size. It's another numerical cutoff here for the ewald summation of the infinite coulomb potential.
 * 
 *    This sums it up. You might also have noticed three entries, one for the element and another two for each hydrogen atom, very similar
 *    in appearance to the list given by molecuilder. Compare to the explanation given in the config file section \ref config above.
 *    Of course, the above shown changes could also have been made during the edit menu of molecuilder, we just wanted to demonstrate that
 *    it's perfectly safe to use a text editor as well (any more than one white space such as some more spaces and/or tabs are 
 *    automatically read over during the parsing of the config file).
 * 
 *    We may now start a calculation.
 * 
 *  \section launching Performing the calculation
 * 
 *    Enter the directory which you specified as the 'bindir' where the executable shall be installed in, let's say for this example
 *    it's '/tmp/pcp/run'. Now, if you have the mpi package installed and are able to launch mpirun, enter this:
 * 
 *    - mpirun -np 1 ./pcp -vvv -w /tmp/H2/H2-config
 * 
 *    Here, '1' is the number of processes needed, the product of ProcPEPGamma and ProcPEPsi. If not, enter this:
 * 
 *    - ./pcp -vvv -w /tmp/H2/H2-config
 * 
 *    More comfortably we may also take the unix shell script 'run', which uses mpirun and evaluates the product by itself. However,
 *    as it is platform-dependent and thus it is provided just as an idea-giver. It is installed in the bindir from subdirectory 'run'
 *    during 'make install'. However, its executable permissions must still be set: e.g. 'chmod 755 run' (The same applies for all
 *    other 'shell scripts' used in this tutorial). Also, the common paths are set in the file 'suffix', also in the bindir and must
 *    be adapted to your local context.  Basically, there is always the rather uncomfortable way of doing every by hand, which is
 *    explained as well, or use these scripts if you can make them work.
 * 
 *    - Enter: ./run to see it's options
 *    - Enter: ./run -vvv /tmp/H2/H2-config H2 to run (here a log file pcp.H2.log is written, with the tag 'H2' which may be chosen arbitrarily).
 * 
 *    Possible errors here are as follows:
 *    - paths in 'suffix' are not changed or were overwritten with defaults on make 'install'
 *    - permission denied: 'chmod 755 run' missing (necessary after 'make install')
 *    - pseudopots not unpacked or wrong path given in config file
 *    - charged system: MaxPsiDouble (..SpinUp/Down) does not match required number of orbitals of the system
 * 
 *    Given 8 (hartree) as ECut and a moderately well performing computer numbers should rush by for a few seconds. Afterwards, the calculations
 *    has already finished (this is of course only the case for a simple molecule such as the hydrogen one). The last hundred lines or so
 *    consist of calculated values, such as the susceptibility tensor and among others the isometric values, shielding for each hydrogen atom,
 *    the total energy (though beware, due to the pseudopotential ansatz for a general molecule it is not equivalent to the real absolute binding
 *    energy) and the perturbed energy which are of minor interest.
 * 
 *    A number of file where generated in /tmp/H2/, some general ones are listed in sections above, we want to discuss a chosen few here:
 * 
 *    - LOG: pcp.H2.log contains all the lines which you just might have missed before (only if pcp was started with 'run'-script)
 *    - Cut plane: pcp.current....csv contains (for each process of ProcPEPGamma) it's part of the specified cut plane of the current density.
 *    - Susceptibility: pcp.chi.csv contains first an explanatory line and then one with ten entries, first is the ecut, then follow the nine entries of
 *      the rank 2 tensor.
 *    - shielding: pcp.sigma_i0_H.csv and ...i1... respectively contain the same as pcp.chi.csv only for the shielding tensor.
 *
 *    And this is it. Of course, \f$H_2\f$ is a very simple molecule. Regard a case where you might want to calculate a (4,3) nanotube with
 *    hundreds of symmetrically aligned carbon atoms. Each of these will produce a pcp.sigma_i..csv, though all should be the same in the
 *    end. Also, we would like to have convergence plots and vector graphs of the current density and its values. 
 * 
 *    In order to produce convergence plots, we need to perform the calculations for various cutoff energies (ECut). You may either move all
 *    the files in /tmp/H2 to e.g. /tmp/H2/8Ht/, edit the config file, pick 12Ht now as ECut and re-run the calculations, move the results
 *    and so on for four to six different values. An easier way is the script file 'test_for_ecut.sh'. Delete all pcp.*-files in /tmp/H2/
 *    (Thus it is always good practice not to pick pcp as prefix for the config file!) and enter in the bindir subdirectory:
 * 
 *    - chmod 755 test_for_ecut (as it is platform-dependent as well, otherwise you get an error: permission denied)
 *    - ./test_for_ecut.sh to see it complaining the lack of a config file
 *    - ./test_for_ecut.sh /tmp/H2/H2-config to see its desired options and the current ecut list (it's a string in the script file adapted to
 *      4 processes sharing the coefficients)
 *    - ./test_for_ecut.sh /tmp/H2/H2-config H2 24 to launch it.
 * 
 *    Notice that it produces no ouput as does pcp. The lines are redirected into the log file whose tag you specified as 'H2'. As we want to
 *    check on what it's doing, we ought to have started it using 'nohup ./test_for...... 24 &' to launch it as a child process. Now,
 *    we need to press CTRL-Z to stop it and enter 'bg' to background it. Look into /tmp/H2. Notice various new subdirectories
 *    resembling the specified ecuts. Enter 'tail -f /tmp/H2/3Ht/pcp.H2.log' to see that the first calculation is already finished.
 *    Continue with 12Ht and furtheron if you are impatient. Otherwise, wait for the shell script to terminate. Now, we have multiple
 *    points for a convergence graph to evaluate. Thus, onward to the analysis.  
 *
 *  
 *  \section analysis Analyzing the results
 *
 *    First, let's have a look at the cut plane and isospheres of the current density.
 * 
 *    - start gnuplot, enter "plot 'pcp.current_proc0.csv' with vectors" in one of the various cutoff directories. Notice the rotating vector
 *      field which the magnetic field induced in between the two hydrogen atoms.
 *    - start opendx by entering dx, load Programm visual.net which resides in the defaults subdirectory of the archive. It may take a moment
 *      the more complex the grid (the higher the energy cutoff) is and will then render three-dimensional isospheres of the current density
 *      on the screen. You may rotate them and 'Sequence Control' let's you see each the current density of of the three magnetic field
 *      directions.
 * 
 *    Now onward to the real analysis.
 *    Here again, we use some shell scripts which gather the results from the various calculations into one file (as you may guess, they pick
 *    the last lines from each dir from the .csv-files and gather them in one file with the same name in the main config directory. Enter in
 *    the bindir (don't forget to chmod):
 * 
 *    - ./gather_all_results /tmp/ H2, where the first argument gives the absolute directory and H2 the molecules subdirectory.
 * 
 *    It will print some stuff and finish. If you have gnuplot installed, some plots may briefly appear as a flicker on the screen. They
 *    created as a postscript in one file called H2.ps. Its purpose is purely to quickly check on the general convergence of each value and
 *    to pinpoint mavericks. Afterwards, you will find a number of results-...-files in the main config directory /tmp/H2. They contain
 *    the gathered chi and sigmas for the various energy cutoffs that were calculated. They are used in the creation of H2.ps. It is
 *    easy to create your own convergence analysis from these. Note also that in 'pcp.convergence.csv' you find a lot of variables, each
 *    run more ore less adds a new line. Thus, this file might be especially useful to check convergence of lets-say sigma against
 *    ecut or against the lattice constant (if you performed different runs with varyzing constants). Basically, all .csv-Files are
 *    results (the suffix may be changed in bindir/suffix though).
 * 
 *    That completes the magnetic analysis of the hydrogen molecule.
 * 
 *    But there are more complex molecules and there we want to delve more deeply into the topic of parallel computing. 
 *  
 * © 2006 Frederik Heber
 */

#include<signal.h>
#include<stdlib.h>
#include<stdio.h>
#include<math.h>
#include"mpi.h"
#include"data.h"
#include"errors.h"
#include"helpers.h"
#include"init.h"
#include"pcp.h"
#include"opt.h"
#include"myfft.h"
#include"gramsch.h"
#include"output.h"
#include "run.h"
#include "pcp.h"

#define MYSTOPSIGNAL SIGALRM    //!< external signal which gracefully stops calculations 

static void InitSignals(void);  

void (*default_sighandler)(int);        //!< deals with external signal, set to \ref SigHandlerCPULIM()
volatile sig_atomic_t cpulim = 0;       //!< contains external signal
int par_cpulim = 0;                             //!< for all MPI nodes: 0 = continue, 1 = limit reached, end operation
int myrank = 0;                                 //!< Rank among the multiple processes

/** Handles external Signal CPULimit.
 * \ref cpulim is set to 1 as a flag
 * especially if time limit is exceeded.
 * \param sig contains signal code which is printed to screen
 */
static void SigHandlerCPULIM(int sig) { 
  if(myrank == 0)
    fprintf(stderr,"process %i received signal %d\n", myrank, sig);
  cpulim = 1;
  return;
}

/** Checks if CPU limit is reached.
 * is supposed to be called ever and again, checking for \ref cpulim,
 * then \ref cpulim is broadcasted to all MPI nodes preventing deadlock
        \note On reaching time limit: save all in datafile, close everything
 * \param *P \ref Problem at hand
 * \return is equal to cpulim
 */
int CheckCPULIM(struct Problem *P) {
  /* Bei Zeitlimit: evtl DataFile ausgeben, alles abschliessen */
  par_cpulim = cpulim;
  MPI_Bcast(&par_cpulim, 1, MPI_INT, 0, MPI_COMM_WORLD);
  if (!par_cpulim) return 0;
  if (myrank == 0) fprintf(stderr,"cpulim reached, finish data\n");
  return 1;
  /* Ende einleiten ! */
}

/** Initializes signal handling.
 * Sets \ref myrank to 0 and installs \ref SigHandlerCPULIM
 */
static void InitSignals(void) {
  myrank = 0/*P->Par.me*/;
  default_sighandler = signal(MYSTOPSIGNAL, SigHandlerCPULIM);
}

/** Checks additionally for signal.
 * If signal has been processed, it gets re-processed by default handler
 * in order to return correct status to calling script
 */
static void CheckSigReturn(void) {
  signal(MYSTOPSIGNAL, default_sighandler);
  if(cpulim)
    raise(MYSTOPSIGNAL);
}

#if 0
#define testing 1
/** FFT Test.
 * perfoms some tests on fft
 * \param *P \ref Problem at hand
 */
static double fftTest(struct Problem *P)
{
  int i,d,ii,ix,iy,iz;
  double MesTime1, MesTime2;
  const struct Lattice *Lat = &P->Lat;
  struct LatticeLevel *Lev = &Lat->Lev[STANDARTLEVEL];
  struct  fft_plan_3d *plan = Lat->plan;
  struct Density *Dens = Lev->Dens;
  fftw_complex *destC = Dens->DensityCArray[TotalLocalDensity];
  fftw_real *destCR = (fftw_real *)destC;
  fftw_real *destCR2 = Dens->DensityArray[TotalLocalDensity];
  fftw_complex *work = (fftw_complex *)Dens->DensityCArray[TempDensity];
  const double factor = 1./Lev->MaxN;
  /* srand(1); */
  for (d=0; d < (P->Par.me_comm_ST_Psi+P->Par.Max_me_comm_ST_Psi*P->Par.me_comm_ST_PsiT); d++)
    for (i=0; i<Dens->LocalSizeR; i++)
      rand();
  for (i=0; i<Dens->LocalSizeR; i++) {
    destCR[i] = 1.-2.*(rand()/(double)RAND_MAX);
    destCR2[i] = destCR[i]; 
  }
  WaitForOtherProcs(P,0); 
  MesTime1 = GetTime();
  fft_3d_real_to_complex(plan, STANDARTLEVEL, FFTNF1, destC, work);
  for (i=0; i<Dens->LocalSizeC; i++) {    
    destC[i].re *= factor;
    destC[i].im *= factor;
  }
  fft_3d_complex_to_real(plan, STANDARTLEVEL, FFTNF1, destC, work);
  MesTime2 = GetTime();
  for (i=0; i<Dens->LocalSizeR; i++) {
    if (fabs(destCR2[i] - destCR[i]) >= MYEPSILON) { 
      iz = i % Lev->N[2];
      ii = i / Lev->N[2];
      iy = ii % Lev->N[1];
      ix = ii / Lev->N[1];
      fprintf(stderr,"FFT(%i)(%i,%i) =(%i)(%i,%i,%i) %g = |%g - %g| eps(%g)\n",P->Par.my_color_comm_ST,P->Par.my_color_comm_ST_Psi, P->Par.me_comm_ST_Psi, i, ix, iy, iz, fabs(destCR2[i] - destCR[i]), destCR2[i], destCR[i], MYEPSILON);
    }
  }
  return(MesTime2-MesTime1);
}
  
/** GS Test.
 * performs test on Gram-Schmidt
 * \param *P \ref Problem at hand
 */
static double GSTest(struct Problem *P)
{
  struct LatticeLevel *Lev = &P->Lat.Lev[STANDARTLEVEL];
  int i,j,k;
  double MesTime1, MesTime2;
  int l = P->Lat.Psi.AllLocalNo[0]-1;
  if (P->Par.my_color_comm_ST_Psi == 0) {
    for (k=0; k<P->Par.me_comm_ST_Psi; k++)
      for (j=0; j<2*Lev->AllMaxG[k]; j++)
        rand();
    l = P->Lat.Psi.LocalNo;
    P->Lat.Psi.LocalPsiStatus[Occupied][l].PsiGramSchStatus = (int)NotOrthogonal;
    for (i=0; i < Lev->MaxG; i++) {
      Lev->LPsi->LocalPsi[l][i].re = 1.-2.*(rand()/(double)RAND_MAX);
      Lev->LPsi->LocalPsi[l][i].im = 1.-2.*(rand()/(double)RAND_MAX);
    }
  }
  P->Lat.Psi.AllPsiStatus[Occupied][l].PsiGramSchStatus = (int)NotOrthogonal;
  WaitForOtherProcs(P,0); 
  MesTime1 = GetTime();
  GramSch(P, &P->Lat.Lev[STANDARTLEVEL], &P->Lat.Psi, Orthonormalize);
  MesTime2 = GetTime();
  if (P->Par.my_color_comm_ST_Psi == 0) {
    for (k=P->Par.me_comm_ST_Psi+1; k<P->Par.Max_me_comm_ST_Psi; k++)
      for (j=0; j<2*Lev->AllMaxG[k]; j++)
        rand();
  }
  return(MesTime2-MesTime1);
}
#endif


#ifndef MAXTESTRUN
#define MAXTESTRUN 100  //!< Maximum runs for a test
#endif

#if 0
/** combined GS fft test.
 * tests fft and Gram Schmidt combined
 * \param *P \ref Problem at hand
 */
static void TestGSfft(struct Problem *P)
{
  int i, MaxG=0;
  double fftTime = 0;
  double GSTime = 0;
  double *A = NULL;
  double *AT = NULL;
  double avarage, avarage2, stddev;
  for(i=0; i < P->Par.Max_me_comm_ST_Psi; i++)
    MaxG += P->Lat.Lev[STANDARTLEVEL].AllMaxG[i];
  if (!P->Par.me_comm_ST_Psi) A = Malloc(sizeof(double)*P->Par.Max_me_comm_ST_Psi,"TestGSfft");
  if (!P->Par.me_comm_ST_PsiT && !P->Par.me_comm_ST_Psi) AT = Malloc(sizeof(double)*P->Par.Max_me_comm_ST_PsiT,"TestGSfft");
  for (i=0;i<MAXTESTRUN;i++) 
    fftTime += fftTest(P);
  fftTime /= MAXTESTRUN;
  MPI_Gather( &fftTime, 1, MPI_DOUBLE, A, 1, MPI_DOUBLE, 0, P->Par.comm_ST_Psi );
  if (!P->Par.me_comm_ST_Psi) {
    avarage = 0;
    for (i=0; i < P->Par.Max_me_comm_ST_Psi; i++) 
      avarage += A[i];
    avarage /= P->Par.Max_me_comm_ST_Psi;
    avarage2 = 0;
    for (i=0; i < P->Par.Max_me_comm_ST_Psi; i++) 
      avarage2 += A[i]*A[i];
    avarage2 /= P->Par.Max_me_comm_ST_Psi;
    stddev = sqrt(fabs(avarage2-avarage*avarage));
    fprintf(stdout,"fft: Grid(%i, %i, %i)(%i) ST(%i)MProc(%i, %i)=(%i, %i): avg %f   std %f\n", 
            P->Lat.Lev[0].N[0],P->Lat.Lev[0].N[1],P->Lat.Lev[0].N[2],
            MaxG,
            P->Par.my_color_comm_ST,
            P->Par.Max_me_comm_ST_PsiT, P->Par.Max_me_comm_ST_Psi,
            P->Par.me_comm_ST_PsiT,P->Par.me_comm_ST_Psi,
            avarage, stddev);   
  }
  srand(2);
  for (i=0;i<MAXTESTRUN;i++)
    GSTime += GSTest(P);
  GSTime /= MAXTESTRUN;
  MPI_Gather( &GSTime, 1, MPI_DOUBLE, A, 1, MPI_DOUBLE, 0, P->Par.comm_ST_Psi );
  if (!P->Par.me_comm_ST_Psi) {
    avarage = 0;
    for (i=0; i < P->Par.Max_me_comm_ST_Psi; i++) 
      avarage += A[i];
    avarage /= P->Par.Max_me_comm_ST_Psi;
    avarage2 = 0;
    for (i=0; i < P->Par.Max_me_comm_ST_Psi; i++) 
      avarage2 += A[i]*A[i];
    avarage2 /= P->Par.Max_me_comm_ST_Psi;
    stddev = sqrt(fabs(avarage2-avarage*avarage));
    fprintf(stdout,"GS : Grid(%i, %i, %i)(%i) ST(%i)MProc(%i, %i)=(%i, %i): avg %f   std %f\n", 
            P->Lat.Lev[0].N[0],P->Lat.Lev[0].N[1],P->Lat.Lev[0].N[2],
            MaxG,
            P->Par.my_color_comm_ST,
            P->Par.Max_me_comm_ST_PsiT, P->Par.Max_me_comm_ST_Psi,
            P->Par.me_comm_ST_PsiT,P->Par.me_comm_ST_Psi,
            avarage, stddev);   
  }
  if (!P->Par.me_comm_ST_Psi) Free(A, "TestGSfft: A");
  if (!P->Par.me_comm_ST_PsiT && !P->Par.me_comm_ST_Psi) Free(AT, "TestGSfft: AT");
}
#endif

/** Run Simulation.
 * just calls \ref CalculateMD()
 \if testing==1
 * also place to put \ref TestGSfft(P), \ref GSTest(P) or \ref fftTest(P)
 \endif
 * \param *P \ref Problem at hand
 */
static void RunSim(struct Problem *P) {
  if (P->Call.out[NormalOut]) fprintf(stderr,"Proc %i: Running Simulation !\n",P->Par.me);
  CalculateMD(P);
  if (P->Call.out[NormalOut]) fprintf(stderr,"Proc %i: Ending Simulation !\n",P->Par.me);
  /*  TestGSfft(P);*/
}

/** Preparation, running and cleaning of a run.
 * Allocate Problem structure,
 * read command line options GetOptions(), 
 * define verbosity of output groups SetOutGroup1(),
 * maybe StartDebugger(),
 * parse the configuration files ReadParameters().
 * 
 * Pay attention to external stop signals InitSignals(),
 * define verbosity within the MPi communicators SetOutGroup2(),
 * initialize the timing arrays InitSpeedMeasure(),
 * WaitForOtherProcs(),
 * and doe the initialization of the actual problem Init() (SpeedMeasure()'d in InitTime).\n
 * Runs the Simulation RunSim() and cleans up at the end by calling WaitForOtherProcs(),
 * CompleteSpeedMeasure() and RemoveEverything()
 * \param argc argument count from main
 * \param argv argument array from main
 */
static void Run(int argc, char **argv) {
  struct Problem *P = (struct Problem *)
    Malloc(sizeof(struct Problem),"Run - P");   /* contains options, files and data regaring the simulation at hand */
  GetOptions(&P->Call, argc, argv);
  SetOutGroup1(&P->Call);
  if(P->Call.debug == 1) StartDebugger();        
  ReadParameters(P, P->Call.MainParameterFile);  
  StartParallel(P, argv); 
  InitSignals();    
  SetOutGroup2(P, &P->Call);
  InitSpeedMeasure(P);
  WaitForOtherProcs(P,1);
  SpeedMeasure(P, InitTime, StartTimeDo);
  Init(P);
  SpeedMeasure(P, InitTime, StopTimeDo);          
  RunSim(P);                   
  WaitForOtherProcs(P,1);        
  CompleteSpeedMeasure(P);
  RemoveEverything(P);
}

/** Main routine.
 * Launches MPI environment (Init and Finalize), starts Run() and gives
 * correct return signal on exit
 * \param argc argument count
 * \param argv argument array
 * \return exit code (always successive)
*/
int main(int argc, char **argv) {
  MPI_Init(&argc, &argv);
  Run(argc, argv);
  MPI_Finalize();
  CheckSigReturn();
  return EXIT_SUCCESS;
}